Home - Our products - PRESTONETT Fill & Finish Filler
PRESTONETT Fill & Finish Filler
Ready mixed levelling & finishing filler
Use
- Levelling and finishing substrates
Product advantages:
- 2 IN 1: fills and finishes
- Levels uneven surfaces up to 5 mm
- Trowel, roller or airless application
- Ready mixed – No water required on site
- Easy to apply: excellent glide/smoothing properties
- Easy to sand
Features
- Box 25 kg
- Wall coverings
- Conventional paint
- Primer
- Concrete
- Cellular concrete
- Cement
- Concrete block
- Brick
- Plaster
- Plasterboard
- Old painted substrates
- Ready mixed
- Average Consumption : 1 to 3 kg/m²
- Matériel :
Environmental Data
NF ENVIRONMENT
This NF ENVIRONNEMENT brand combines efficiency
and ecology:
– Performance guaranteed,
– Limitation of environmental and health impacts during
its manufacture and use due to its composition.
INDOOR AIR EMISSIONS
Information on the level of emissions of volatile
substances into indoor air presenting a risk of toxicity by
inhalation, on a class scale from A+ (very low emissions)
to C (high emissions)
97% OF RAW MATERIALS OF NATURAL ORIGIN
Calcium carbonate, water, talc, clay, sugar
Contain at least 30% recycled plastic
Not recyclable
This product is manufactured in our factory whose environmental management system is certified by Afnor
Our PRESTONETT Fill & Finish Filler is made in France at our factory in La Chapelle-la-Reine.
FAQ
A 2-in-1 filler handles both levelling and finishing with a single product. PRESTONETT Fill & Finish Filler fulfils this role. It levels uneven substrates up to 5 mm thick while giving a very fine finish, which avoids following a levelling filler with a finishing filler. Ready mixed and suitable for roller application, it is particularly suited to renovation jobs where the condition of the walls varies.
Yes, provided you use a filler approved for this application. PRESTONETT Fill & Finish Filler can be applied by roller, which makes it easy to lay on and saves time on large areas. Load the plaster roller, lay the material on in an even coat, then smooth immediately with a blade or finishing trowel. The roller does not replace smoothing; it replaces loading with the blade.
On an uneven wall, a standard skimming filler is not enough, because it works in a thin coat. You need a product that can build up. PRESTONETT Fill & Finish Filler levels uneven substrates up to 5 mm and finishes in the same operation, with an average consumption of 1 to 3 kg per m². It can be applied to concrete, cellular concrete, cement, concrete block, brick, plaster, plasterboard and old paintwork.
With PRESTONETT Fill & Finish Filler, average consumption is 1 to 3 kg per m². For 25 m², allow between 25 and 75 kg, which is one to three 25 kg boxes. This figure corresponds to a standard application. On a very hollow substrate, where more material is applied to restore flatness, consumption increases in proportion to the thickness applied.
Yes. Concrete block is one of the substrates for PRESTONETT Fill & Finish Filler. First brush down and dust off the wall, then treat the porosity of the substrate with a primer if necessary. Then apply the filler, loading the recessed joints first, and level the whole surface. Its ability to level up to 5 mm means block joints can be concealed with fewer passes.
Once the filler is dry and sanded, the PRESTONETT Fill & Finish Filler product sheet lists primer, paint and lightweight wall coverings as finishes. A primer is recommended before painting, as it regulates the absorbency of the substrate and avoids differences in sheen. It is essential to dust off thoroughly after sanding, otherwise the finish will not bond properly.
On a large-area job, the pack size matters as much as the product. PRESTONETT Fill & Finish Filler is available in a 25 kg box. With an average consumption of 1 to 3 kg per m², a 25 kg box covers about 8 to 25 m². Its unlimited working time means a large box can be opened without fear of waste.
