Home - Our products - PRESTONETT FINE SURFACE FILLER
PRESTONETT FINE SURFACE FILLER
Ready mixed fine surface filler
Use
- Finishing
Product advantages:
- Very fine finish
- Excellent adhesion to substrates
- No need to spot prime
- Enhances the paint finish
- Smooth application
- Easy sand
- Over coat after 4 hours
- Will not flash or grin
- White
Features
- Bucket 1 kg
- Wall coverings
- Conventional paint
- Primer
- Concrete
- Cement
- Plaster
- Plasterboard
- Old painted substrates
- Previously printed wood and derivatives
- Ready mixed
- Average Consumption : 0,25 kg/m²
- Matériel :
Documentation
Environmental Data
The NF ENVIRONNEMENT certification combines performance and environmental responsibility:
- Guaranteed performance
- Reduced impact on the environment and human health during manufacturing and use, thanks to its composition
For more information, visit www.ecolabels.fr
Information on the level of emission of volatile substances into indoor air, which may pose a risk of toxicity by inhalation, rated on a scale from A+ (very low emissions) to C (high emissions).
Our PRESTONETT FINE SURFACE FILLER is made in France at our factory in La Chapelle-la-Reine.
97% of raw materials are of natural origin:Calcium carbonate, talc, clay, water
Contains at least 30% recycled plastic
Not recyclable
This product contains a maximum of 1 g/L VOC
FAQ
One pass is enough on a properly trued, even substrate. A second pass is justified when the first shows gaps or differences in texture, especially on an uneven background. PRESTONETT FINE SURFACE FILLER can be overcoated after 4 hours. It is applied at 1 mm thickness, with an average consumption of 0.25 kg per m².
Work in stages and never skip one. First fill the holes and cracks, then true up the wall with a levelling filler, then apply a finishing filler in a thin coat over the whole surface. PRESTONETT FINE SURFACE FILLER fulfils this last role, at 1 mm thickness and 0.25 kg per m². Once fully dry, sand with a fine grit and dust off carefully to prepare for painting.
On a ceiling, ease of application comes first, because blade work there is tiring. PRESTONETT FINE SURFACE FILLER is ready mixed, glides on well and is applied by hand. Its low consumption of 0.25 kg per m² limits the weight of material handled.
Wait until it is fully dry, use a fine grit and never press hard. Work with a sanding block or a hand sander, using even strokes and without lingering in one spot. Sanding too hard on a finishing coat cuts through the film and exposes the base again. PRESTONETT FINE SURFACE FILLER sands easily, which limits the effort needed, provided the surface was laid on tight during application.
With PRESTONETT FINE SURFACE FILLER, average consumption is 0.25 kg per m². For 30 m², allow about 7.5 kg of product. It comes in 1 kg buckets. Actual consumption increases if the substrate is uneven or if several passes are needed.
Yes. Old paintwork is one of the substrates for PRESTONETT FINE SURFACE FILLER. Check that the paint film is firmly bonded, remove any blistered areas and dust off carefully. On gloss or satin paint, sanding to provide a key is essential, otherwise the filler will not bond. On a very absorbent matt background, a primer is preferable.
