Jobs with large areas to cover call for well-organised logistics and preparation work that runs without a break. Large-pack plasters and fillers meet both needs, with pack sizes suited to large areas and to mechanical application.
Supplied in 25 kg buckets or bags, they keep the same texture from the start of the job to the end. They are made for plasterers, dryliners and decorators who want both productivity and consistency, whether for levelling, skimming or finishing walls and ceilings.
Our 25 kg plasters and fillers
Why buy plaster and filler in large packs?
The main advantages of a large pack are cost and convenience. First, the cost per square metre is generally lower, as larger packs bring down the unit cost. Second, less time goes on preparation and refilling: fewer buckets and bags to open, and a continuous feed for airless sprayers and screw pumps.
Using the same material throughout helps avoid variations in colour or consistency between batches, for an even result across the whole job. Storage on site is simpler too, with fewer containers and easier stock control. All five products have a shelf life of 12 months from the date of manufacture, stored unopened in their original packaging and protected from frost, heat (max. +30°C), sun and moisture.
Uses and application methods
On large areas and in new build, large-pack plasters and fillers are used for light levelling, skimming and preparation before painting. Between them, they cover the usual substrates: plasterboard, plaster, concrete and cement-based substrates, brick, and sound old paintwork once prepared. Check each product’s substrates on its data sheet: BAGAR AIRLISS J is for plasterboard only, and BAGAR AIRLISS EXT is for exterior work on concrete, cement, concrete block, brick and old painted substrates.
They can be applied by hand on detailed or awkward areas, rolled on and then smoothed off over open areas, or sprayed. Large packs make it easy to keep airless sprayers and screw pumps fed, for a steady output and an even coat thickness. All five products can be applied by hand or with an airless sprayer. BAGAR AIRLISS LF, BAGAR AIRLISS J, BAGAR AIRLISS G and PRESTONETT Fill & Finish Filler can also be roller-applied. BAGAR AIRLISS G can be applied with a screw pump (nozzle up to 6 mm) and BAGAR AIRLISS EXT with a spray machine (nozzle up to 6 mm). With the four Bagar plasters, no strainer or filter is needed for airless application.
After application and smoothing, leave to dry completely, then sand with a fine grit and dust off. On the four interior products, apply a suitable primer before decorating; their data sheets list primer, conventional paint and lightweight wall coverings as overcoats. BAGAR AIRLISS EXT is overcoated with exterior paint: thin film, thick plastic coating or waterproofing coating.
Which 25 kg product for which job?
- BAGAR AIRLISS LF: interior finishing and smoothing, 3 mm application thickness. 25 kg bucket.
- BAGAR AIRLISS J: interior taping and jointing of plasterboard, finishing, and fixing corner tapes and beads; suitable for use with all automated taping and jointing tools. 3 mm application thickness. 25 kg bucket.
- BAGAR AIRLISS G: one product for both levelling and finishing indoors, 5 mm application thickness. 25 kg bag or 25 kg bucket.
- BAGAR AIRLISS EXT: exterior leveller, suitable for finishing the undersides of balcony slabs before decoration and for levelling contraction/control joints in concrete. 5 mm application thickness. 25 kg bag or 25 kg bucket.
- PRESTONETT Fill & Finish Filler: 2-in-1 interior filler that fills and finishes, levelling uneven surfaces up to 5 mm. 25 kg bucket.
The benefits of large packs on site
Using large-pack plasters and fillers makes the job easier to organise. You save time: you keep up a steady pace with fewer interruptions, and the team works more efficiently because everyone knows there is enough material to hand. A consistent texture gives a smooth finish without visible lap marks, which means fewer touch-ups and less paint at the decorating stage.
Working from a single type of container also means fewer mixing errors and fewer differences in texture from one bucket to the next. All five products are ready mixed, so there is no powder to mix on site: just stir before use and, if necessary, dilute by up to 3%. Packaging and transport costs come down, and there is less packaging waste to deal with. Part-used buckets and bags can be closed tightly and kept for later, so less material goes to waste. Finally, the consistent colour and flatness you get from a single batch make for satisfied clients and a finish that does justice to your workmanship.




